Jeśli wiadomość nie jest wyświetlana w Państwa języku prosimy o kontakt Emailem.

Drum Screen Intake Solutions

The Geiger® large rotating Drum Screens are typically installed in cooling water intake systems downstream from trash rakes or coarse bar screens. Debris is removed by efficient filtration at Geiger High-Capacity Drum Screens upstream of circulating water pumps. In this way the filtrated water distributed to a plant’s downstream system (heat exchangers, membranes) is freed from particles larger than the mesh size of the drum screening machines, similar to traveling water Screens.

Geiger® High-Capacity Drum screening machines are designed to efficiently filter/screen raw water at intakes as well as waste water while massively reducing maintenance procedures (low lifecycle costs). The In-to-Out flow pattern with double-entry from both sides ensures low hydraulic losses. Static and dynamic forces always act vertically (no buoyancy). Loads are vertical and absorbed by the civil structure. Debris accumulated at the inside of the drum cannot drop onto the channel bottom, which would be difficult to access (such as in the case of out-to-inflow patterns).

The debris being accumulated at the drums screen filters is being washed off by spray water nozzles following the gravity flow at the upper level during the drum screens rotation. The drum screens rotation is being triggered automatically when debris starts to accumulate at the inside of the drum.

Opis

Further Description and the Geiger High-Capacity Shaftless Drum Screen Option
Geiger® Drum Screens are generally designed to support high differential loading. Motor and gearbox are mounted at deck level for easy access and maintenance.
Sizes: 6 – 22 m diameter
Filtration: 1- 10 mm mesh size
The Geiger® Cathodic Corrosion Protection system combines well with Drum Screen structures built in coated carbon steel, 316L or other stainless or Duplex stainless steels for seawater applications.
The Geiger® Shaftless High-Capacity Drum Screens, (sometimes referred to as Frameless or Spokeless Drum Screens) are designed without radial arms/spokes or a central shaft. The slightly lighter nature of the Geiger® Shaftless Drum Screen allows for a reduced load on the civil work, thus avoiding the need to accomodate shaft-supporting civil structure, as required for Framed Drum Screen installations.
No permanently submerged moving parts are involved and the mesh panels, rollers or pins can be inspected, maintained and if necessary replaced at deck level without the need to dewater the screening chamber. The Geiger® Shaftless Drum Screens require a very simple civil work structure and the design of the tracks attached to the chamber walls allows for ample adjustment to accommodate minor variations in the flatness of the chamber walls.
The typical application of Geiger® Shaftless Drum Screens are in open channel intakes with capacities up to 90,000m³/hr per channel. Additional advantages are the clean inlet (hydraulic passage) into the screen and a greatly simplified civil work. For flows in excess of 90,000m³/hr per channel the Geiger Framed Drum Screen or a higher quantity of channels should be considered.
Contact us today for a proposal on your specific Project.

Siedziba i osoba kontaktowa

Ameryka Północna

Aqseptence Group, Inc., Centerport, NY

Miejsce sprzedaży
15 Greenhaven Way
Centerport, NY 11721
Stany Zjednoczone

Tel: +1 631 839 1297

Fax: +1 631 239 4121

info.geiger@aqseptence.com

Europa

Aqseptence Group GmbH, Karlsruhe

Lokalizacja sprzedaży i produkcji
Hardeckstrasse 3
76185 Karlsruhe
Niemcy

Tel: +49 721 5001 0

Fax: +49 721 5001 213

info.geiger@aqseptence.com

Zapoznaj się z naszym portfolio

Pokaż