Si el contenido no está disponible en su idioma preferido, contáctenos por email.
Before water can be used for the processes, it needs to be cleared from pollutants and suspended solids for an optimized heat rate, lowest downtime risks and less or no backflushing of debris filters. Always aiming for the highest energy-efficiency of your plant!
In the case of cooling, in order to prevent damage to pumps and heat exchangers, the sea or river water required has to be cleared of debris, eg, sea weed, jelly fish, plastic, sand, etc. This is where our zero-carry-over bar and mesh screening machines come into their best application.
The most important Aqseptence Group brands in the Power sector are Geiger® (water inlets and boiler make-up water), Johnson Screens® (mostly for boiler make-up water extraction) and Diemme® Filtration.
Geiger's main applications in Power
The Division Water Intake Systems with its brand Geiger® has been providing filtration and bar screening machines for the screening of cooling water in power plants for five decades.
Our highly robust and customized screening machines stand for longest lifetimes on greenfield and brownfield (retrofit) applications to increase plant efficiency.
Low OPEX, lesser total CAPEX, construction time and space savings are the key advantages of our unique screening solutions. The aim is to protect pumps and condenser tubes from the carry-over of debris. More than 2,000 highly sensitive plants world-wide are equipped with Geiger® and Passavant® machines. Our in-house produced cathodic corrosion protection systems (impressed current type) stand for the best corrosion resistance in seawater.
From an environmental point of view, non-state-of-the art cooling water intake structures can cause damage by drawing large numbers of fish or their eggs into a power plant's cooling system.
To protect flora and fauna and meet environmental requirements, Geiger® modified travelling water screens (with fish collection buckets, fish handling and return systems) are amongst the best available technology (BAT according the EPA Clean Water Act 316 b) for impingement and entrainment reduction.
Diemme Filtration's main applications in Power
Sludge produced by the water intake treatment plant has to be dewatered. For this purpose, the fully-automatic filter press is mainly used. Additionally, in thermal power plants using gas, oil or coal, fumes need to be treated as they contain harmful sulphur dioxide and trioxide (generated by burning sulphur).
In these cases, the fumes are desulphurized through wet exhaustion with lime and limestone, heavy metals and ashes contained in fumes, letting the sulphur oxides precipitate to calcium sulphate.
Also, in this scenario, sludge is dewatered using highly-automated, membrane Diemme®
Filtration filter presses. Additionally, wastewater produced by the
power plant comes from different areas and flows into a physicochemical
treatment plant. At the end of this treatment, sludge also has to be
dewatered using a filter press.
Browse through our available products related to our market, Power, by using the filter below.
Feel free to choose your regional contact to get in touch with us for more information.
Ubicaciones y Contacto
Aqseptence Group Srl, Lugo, Italia
Lugar de venta y fabricación
Via Gessi 16
48022 Lugo, RA
Tel: +39 0545 20611
Fax: +39 0545 email@example.com