If the content is not available in your preferred language, please contact us by e-mail.

Intech Aqualogic Lago

Aqualogic Lago® facilitates targeted nitrification/denitrification in pond treatment plants, combined with high carbon and phosphate elimination efficiency by reconstruction of an existing pond into an SBR-pond to enrich the activated sludge, required for the biological cleaning processes.

Unique Selling Point

  •     Cost effective improvement of pond treatment plants
  •     Practical utilisation of existing building structures
  •     Targeted introduction of nitrification and denitrification
  •     Hydraulic and load dependent process management
  •     Conservation of near-natural plant construction


The Aqualogic Lago® system by Aqseptence Group facilitates targeted nitrification and denitrification in pond treatment plants, combined with high carbon and phosphate elimination efficiency. This process sets new standards for the performance potential of pond treatment plants, with its minimum amount of reconstruction, the utilisation of existing building structures and a control concept based on Fuzzy-Logic.
Aqualogic Lago® is a very reliable and economic alternative to the construction of a new wastewater treatment plant in concrete. Conventional pond treatment plants benefit, above all, from their large volume and the corresponding diluting effect. For the most part, biological degradation only occurs in this case at the contact zone water/bottom sludge.
A central component of Aqualogic Lago® is the reconstruction of an existing pond into an SBR-pond in which the activated sludge, required for the biological cleaning process, can then be enriched. The treatment stages, the oxygen input and the required mixing are operated dynamically by an integrated control system. Either a fine bubble aeration system or surface aerators are used for aeration, depending on the technology already installed and the depth of the water. Where necessary, the ponds are sealed with concrete or lined with long-life HDPE foil.
Aqualogic Lago® is individually integrated into the existing pond treatment plant, taking the local conditions and requirements into consideration, so that optimal results are achieved. The process is suitable for both aerated and non-aerated pond treatment plants which are the size of a population equivalent of 100 to 5,000.
As with the Aqualogic Lago® system a part of the existing wastewater pond is no longer required for further biological wastewater cleaning, it can be purposefully used for other tasks. If the pond treatment plant exhibits a very high inflow of mixed sewage water, then rain or mixed water treatment, for example, can be effected.


Energy and Prozess Efficiency

The various – partly counter-directional – processes in wastewater treatment plants place heavy demands on automation. A comprehensive approach is, required to ensure efficiency in the implementation of optimization measures. This is the...


Locations and Contact


Aqseptence Group FZCO, Dubai

Sales Location
East Side 5EA, 7th floor, 722
P.O. Box 371082
Dubai Airport Free Zone
United Arab Emirates
United Arab Emirates

Tel: +971 42278456



Aqseptence Group Pty Ltd., Brisbane

Sales and Manufacturing Location
88 Brickyard Road,
Geebung 4034 QLD
PO Box 85, Virginia DC,
QLD 4014

Tel: +61 7 3867 5555

Fax: +61 7 3867 5566



Aqseptence Group GmbH, Rimpar

Sales Location
Kettelerstrasse 5 -11
97222 Rimpar

Tel: +49 9365 8082 60

Fax: +49 9365 8082 50



Aqseptence Group GmbH, Aarbergen

Sales and Manufacturing Location
Passavant-Geiger-Strasse 1
65326 Aarbergen

Tel: +49 6120 280

Fax: +49 6120 28 2182


Explore our portfolio