If the content is not available in your preferred language, please contact us by e-mail.

Nu-Well 500 Chlorout

Chlorout

Nu-Well 500 Chlorout is used on the surface, after the well or system discharge has been pumped into a tank or holding pond, as follows:

Insights

Measure the chlorine level in the water, and calculate the dosage of Nu-Well 500 Chlorout needed for neutralization, as indicated on the table
Mix Nu-Well 500 Chlorout with the chlorinated water. The chlorine levels will neutralize almost immediately If dechlorinating a large volume, dissolve Nu-Well 500 Chlorout in 1 gal. of water for every pound of Nu-Well 500 Chlorout required. Some heat is generated upon dilution
Discharge to an approved outlet

Description

Used to neutralize chlorine solutions before their disposal
Safe to handle
Concentrated crystal that is easy to dissolve for fast neutralization
Easy to use

Physical Properties, Shipping and Handling

Appearance: White to opaque coarse crystal

Density: 10.0 lbs./gal.

pH (as shipped): 8.6 (7.5% solution)

Specific Gravity: 1.67

Freeze point: Not Applicable - solid

Solubility (in water): 33% at 32

Use range: 0.01 to 1% by volume

This product is not considered dangerous and does not require special handling or disposal
Not regulated as a hazardous material under 49CFR 172.101, RECRA, SARA and CERCLA
10 lbs. containers can be shipped by UPS ground delivery. 50 lbs. pails available
Additional physical and handling data are available on the product MSDS
Nu-Well 500 Chlorout is available in 10 lb. containers and 50 lbs pails

Example

Neutralize a 1,000 gal. tank of well discharge with a chlorine concentration of

180 ppm.

Step 1 Dissolve 1.8 lbs. of Nu-Well 500 Chlorout into approximately 2 gal. of water

Step 2 Add to the tank

Treatment Guide Nu-Well 500 Chlorout

Chlorine Discharge (ppm)	Batch Volume to be Treated
	gal.*				m3**
	100	250	500	1000	1	2	4	5
20	0.02	0.05	0.10	0.20	0.02	0.05	0.10	0.12
40	0.04	0.10	0.20	0.40	0.05	0.10	0.19	0.24
60	0.06	0.15	0.30	0.60	0.07	0.14	0.29	0.36
80	0.08	0.20	0.40	0.80	0.10	0.19	0.38	0.48
100	0.10	0.25	0.50	1.00	0.12	0.24	0.48	0.60
120	0.12	0.30	0.60	1.20	0.14	0.29	0.57	0.71
140	0.14	0.35	0.70	1.40	0.17	0.33	0.67	0.83
160	0.16	0.40	0.80	1.60	0.19	0.38	0.76	0.95
180	0.18	0.45	0.90	1.80	0.21	0.43	0.86	1.07
200	0.20	0.50	1.00	2.00	0.24	0.48	0.95	1.19
250	0.25	0.63	1.25	2.50	0.30	0.60	1.19	1.49
300	0.30	0.75	1.50	3.00	0.36	0.71	1.43	1.79
350	0.35	0.88	1.75	3.50	0.42	0.83	1.67	2.08
400	0.40	1.00	2.00	4.00	0.48	0.95	1.90	2.38
450	0.45	1.13	2.25	4.50	0.54	1.07	2.14	2.68
500	0.50	1.25	2.50	5.00	0.60	1.19	2.38	2.98

* Values are lbs. of Nu-Well 500/batch ** Values are kg of Nu-Well 500/batch NOTE: For best results, first dissolve Nu-Well 500 Chlorout in water; then add to the well discharge as a solution. (About 1 lb of Nu-Well 500 Chlorout to 1 gal of water) *1 m³ = 1,000 L The above table shows the amount (lb or kg) of Nu-Well 500 Chlorout that is necessary to mix into various volumes of discharge water to neutralize a specific chlorine concentration level