If the content is not available in your preferred language, please contact us by e-mail.

Nu-Well 400 Non-Ionic Surfactant

Nu-Well 400 non-ionic surfactant is a non-ionic surfactant capable of use over a wide pH range. The non-ionic nature ensures that the surfactant neither reacts directly nor interferes with any other chemical being used. The surface-active properties of Nu-Well 400 non-ionic surfactant are excellent for improving penetration of hard deposits or for wetting surfaces to be cleaned.

Nu-Well 400 non-ionic surfactant may also be used to improve flow characteristics of heavy fluid or muds used in well construction. By changing the surface tension, Nu-Well 400 non-ionic surfactant improves cleanup of oil or biologically fouled areas.

Insights

Application
  • Nu-Well 400 non-ionic surfactant is used at the rate of 1 gal. per 1,000 gal. of water in the system to be cleaned or the total gallons of cleaning solution to be used. If the system is being cleaned for oil or heavy biofouling, use Nu-Well 400 non-ionic surfactant at the rate of 1 gal. per 500 gal. of water.

      Use range: 0.01 to 0.1% by volume

        Nu-Well 400 Dosage Guide

          Physical Properties, Shipping and Handling

          Appearance: Pale yellow colored liquid

          Density: 9.4 lbs./gal.

          pH (as shipped): 7.5-8

          Specific Gravity: 1.13

          Freeze point: 30°F (-1°C)

          Volatility: 25%

          Solubility (in water): 100%

            Not regulated as a hazardous material under 49CFR 172.101 RCRA, RCRA 40CFR 261, SARA and CERCLA

            This product is not contained in any of the listings; no reportable inventory listings are required, and waste from this product is not considered a hazardous substance

            • The product is not considered dangerous and requires no special handling. Avoid contact with strong acids or alkaline-based products
            • 1 gal. and 5 gal. containers can be shipped by UPS ground delivery
            • Additional physical and handling data are available on the product MSDS
            • Available in 1, 5, 30 and 55 gal. containers
            • Determine static height of water in well
            • Find dosage factor for standard or heavy oil situation
            • Multiply static height x dosage factor
            • This is the amount needed to treat a well


              Dosage Guide

              Nominal Well Size

              Gal./ft.

              l/m

              in.

              mm

              Standard Dose

              Heavy Oils

              Standard Dose

              Heavy Oils

              2

              51

              0.0003

              0.0006

              0.0041

              0.0081

              3

              76

              0.0007

              0.0014

              0.0091

              0.0182

              4

              102

              0.0012

              0.0024

              0.0162

              0.0324

              5

              127

              0.0019

              0.0038

              0.0253

              0.0507

              6

              152

              0.0027

              0.0055

              0.0365

              0.0730

              8

              203

              0.0036

              0.0073

              0.0486

              0.0973

              10

              254

              0.0057

              0.0114

              0.0760

              0.1520

              12

              305

              0.0082

              0.0164

              0.1094

              0.2189

              14

              356

              0.0111

              0.0223

              0.1490

              0.2979

              16

              406

              0.0145

              0.0291

              0.1946

              0.3892

              18

              457

              0.0184

              0.0368

              0.2463

              0.4925

              20

              508

              0.023

              0.045

              0.304

              0.608

              22

              559

              0.027

              0.055

              0.368

              0.736

              24

              610

              0.033

              0.065

              0.438

              0.876

              26

              660

              0.038

              0.077

              0.514

              1.028

              30

              762

              0.051

              0.102

              0.684

              1.368

              34

              864

              0.066

              0.161

              0.879

              1.757

              36

              914

              0.074

              0.147

              0.985

              1.970

              Note: Allowance for additional surface volume should be treated with an additional 1 gal. of Nu-Well 400 per 1,000 gal. of surface system volume (1 l/m³ of surface system volume)

            Locations and Contact

            North America

            Aqseptence Group, Inc., New Brighton, MN

            Sales and Manufacturing Location
            1950 Old Hwy 8 NW,
            New Brighton, MN 55112
            USA

            Tel: +1 651 636 3900

            Fax: +1 651 638 3171

            info.johnsonscreens.us@aqseptence.com

            North America

            Aqseptence Group, Inc., Bakersfield, CA

            Manufacturing Location
            1901 E Brundage Ln,
            Bakersfield, CA 93307
            USA

            Tel: +1 661 323 1525

            Fax: +1 661 323 1606

            info.johnsonscreens.us@aqseptence.com

            North America

            Aqseptence Group, Inc., Forked River, NJ

            Sales and Manufacturing Location
            708 Challenger Way,
            Forked River, NJ 08731
            USA

            Tel: +1 609 693 9434

            Fax: +1 609 971 8708

            info.johnsonscreens.us@aqseptence.com

            Choose your regional contact for a product inquiry.
            A sales representative will respond to you shortly via telephone or email.

            Continent:
            Country of Installation:

            Product inquiries for countries of installation outside of the locations listed below, please contact us via email. info.johnsonscreens.us@aqseptence.com

            Aqseptence Group, Inc., New Brighton, MN

            Sales and Manufacturing Location
            1950 Old Hwy 8 NW,
            New Brighton, MN 55112
            USA

            Tel: +1 651 636 3900

            Fax: +1 651 638 3171

            info.johnsonscreens.us@aqseptence.com

            Aqseptence Group, Inc., Bakersfield, CA

            Manufacturing Location
            1901 E Brundage Ln,
            Bakersfield, CA 93307
            USA

            Tel: +1 661 323 1525

            Fax: +1 661 323 1606

            info.johnsonscreens.us@aqseptence.com

            Aqseptence Group, Inc., Forked River, NJ

            Sales and Manufacturing Location
            708 Challenger Way,
            Forked River, NJ 08731
            USA

            Tel: +1 609 693 9434

            Fax: +1 609 971 8708

            info.johnsonscreens.us@aqseptence.com

            Explore our portfolio

            Show