If the content is not available in your preferred language, please contact us by e-mail.
Nu-Well 100 Pelletized Acid
Nu-Well 100 pelletized acid is formulated for pouring directly into the well. While it may be dissolved and pumped into the well as a liquid, the pellet form rapidly falls through the water column, providing concentrated acid cleaning power at the bottom of the well. The sinking pellets are ideal for wells with short to moderate lengths of screen at the bottom. Agitation of the acid into the blocked area will greatly enhance cleaning. The acid solution should remain in contact for a period of 12 to 24 hours, depending on the nature of the blockage. The table provides recommended dosages for general well cleaning. The amount of acid consumed will depend on the degree of mineral scaling in the well.
Insights
Screen (in.) Number of 1 gal. jars (9 lb.) 2 1/2 3 1 4 2 5 3 6 4 8 5Standard Dosage Recommended Quantities per 5 ft. Screen Length
Diameter
Description
- Dry, pelletized acid that sinks in water for cleaning wells
- Cleans calcium and magnesium carbonate scale, iron deposits and moderate biological growth
- Contains color indicator to allow visual monitoring of pH during treatment
- Can be poured directly into the well without dangerous splashing vapors, as with hydrochloric acid
- Easy to use and transport
- NSF certified for potable water well use
Physical Properties, Shipping and Handling
Appearance: Yellow-white crystalline powder
Density: Approximately 80 lb./ft.3
Solubility: Approximately 20% by weight @ 68ºF (20ºC) (approximately 1 lb./gal. of water)
- Nu-Well 100 pelletized acid is a strong acid-base and should not be stored with strong alkaline materials or oxidizers
- Dust respirators and goggles should be worn where the possibility of dust or mist exists
- Not regulated as a hazardous material under 49CFR 172.101, RECRA, SARA and CERCLA
- Can be shipped by common carrier, DOT Label CORROSIVE
- Additional physical and handling data are available on the product SDS
- Available in 4.5, 9, 45 and 70 lb. containers
- Decomposes at 390º F (200ºC)
Locations and Contact
North America
Aqseptence Group, Inc., New Brighton, MN
Sales and Manufacturing Location
1950 Old Hwy 8 NW,
New Brighton, MN 55112
USA
Tel: +1 651 636 3900
Fax: +1 651 638 3171
info.johnsonscreens.us@aqseptence.comNorth America
Aqseptence Group, Inc., Bakersfield, CA
Manufacturing Location
1901 E Brundage Ln,
Bakersfield, CA 93307
USA
Tel: +1 661 323 1525
Fax: +1 661 323 1606
info.johnsonscreens.us@aqseptence.comNorth America
Aqseptence Group, Inc., Forked River, NJ
Sales and Manufacturing Location
708 Challenger Way,
Forked River, NJ 08731
USA
Tel: +1 609 693 9434
Fax: +1 609 971 8708
info.johnsonscreens.us@aqseptence.com
Choose your regional contact for a product inquiry.
A sales representative will respond to you shortly via telephone or email.
Product inquiries for countries of installation outside of the locations listed below, please contact us via email. info.johnsonscreens.us@aqseptence.com
Aqseptence Group, Inc., New Brighton, MN
Sales and Manufacturing Location
1950 Old Hwy 8 NW,
New Brighton, MN 55112
USA
Tel: +1 651 636 3900
Fax: +1 651 638 3171
info.johnsonscreens.us@aqseptence.comAqseptence Group, Inc., Bakersfield, CA
Manufacturing Location
1901 E Brundage Ln,
Bakersfield, CA 93307
USA
Tel: +1 661 323 1525
Fax: +1 661 323 1606
info.johnsonscreens.us@aqseptence.comAqseptence Group, Inc., Forked River, NJ
Sales and Manufacturing Location
708 Challenger Way,
Forked River, NJ 08731
USA
Tel: +1 609 693 9434
Fax: +1 609 971 8708
info.johnsonscreens.us@aqseptence.com